AS8080-XY Motorized 4-inch XY Stage

Product Description

• High-performance, high-precision motorized XY stage for automation, high-resolution and precise repeat positioning scenarios;
• Travel range: 80mm (X-axis) * 80mm (Y-axis);
• Repeat accuracy of ±5μm, axial error of 0.02mm, minimum resolution ≤2μm;
• Wide speed range: adjustable from 1.625mm/s to 13mm/s, meeting the requirements of precise positioning and rapid movement;
• High-subdivision microstep drive greatly reduces the vibration and noise of the stepping motor for smoother motion;
• Recommended to be used with O’motion 4-axis motion controller or 2 × OSMC-1U single-axis controllers;
• Compatible with the Oeabt microscopy product series for customized integration into microscope systems.

This 4-inch motorized XY stage for automated, high-precision positioning offers an 80*80mm XY travel range, suitable for microscopic imaging, industrial inspection, precision machining and other scenarios.

 

Model	AS8080-XY
Specifications	21920432.2mm
Total Travel	80mm (X-axis) * 80mm (Y-axis)
Maximum Load	3.2kg
Stage Size	209*204mm
Center Aperture	Ø90mm
Dovetail Type	Female dovetail groove: Ø108mm, α=60°
Lead Screw Type	Ø8mm high-speed threaded lead screw, 12mm lead
Guide Rail Type	Dual linear guide rails
Maximum Speed	13mm/s
Minimum Speed	1.625mm/s
Handwheel Minimum Resolution	≤2μm
Repeat Accuracy	±5μm
Axial Error	0.02mm
Backlash	0.01mm (stepping reducer gear clearance)
Motor Type	20BYG geared stepping motor (reduction ratio 5.1:1)
Microstep Resolution	51200 microsteps per revolution (for 1.8° step angle motor)
Sensor Type	Slot-type photoelectric sensor (NPN normally open, high level active)
Operating Voltage	DC 12V
Operating Current	2A
Recommended Driver/Controller	O’motion 4-axis motion control system (OM-4X control driver & OM-4CP operation handle), 2 × OSMC-1U single-axis stepping controller

 

O’motion 4-axis (3+R) Motion Control System
Input Voltage	AC 110V-240V
Output Voltage	DC 24V/5V
Output Current	DC 24V@6A, DC 5V@2A
Rated Power	154W Max
Emergency Stop Switch	Equipped
Controllable Axes	4 axes, 1 axis with closed-loop control
Encoder Support	50-4096 Line, 4MHz Max
Motor Microstep Resolution	1/16-256
Touch Screen Type	Capacitive, 800*480 resolution
Manual Control Mode	Screen keys / 4-way Hall joystick / 2-way Hall joystick / Electronic handwheel (25ppR variable magnification)
Automatic Control Mode	Supports automatic point-to-point motion, interpolated motion
PC Program Control	Not mandatory (Windows version provided)
Control Protocol	O’motion Enhanced v1.1
Protocol Type	ASCII command type
Supported Systems	Windows 7-11 / Linux / Macos / Android / Others
Protection Grade	IP44
Dimensions	300.0210.081.3mm

 

OSMC-1U Single-axis Stepping Controller
Model	OSMC-1U
Drive Voltage	DC 12V-24V
Drive Current	2A Max
Drive Type	16 bit PWM control
Control Algorithm	PID
High-resolution Stepping	51200 microsteps per revolution (for 1.8° step angle motor)
Subdivision Multiple	16X-256X (software adjustable)
Encoder Feedback Bandwidth	500 Hz
Position Counter	32 bit
Operating Mode	Position, Speed, Motion Cycle
Acceleration/Deceleration Curve	S-curve
External Trigger Control	Frequency recognition (PWM signal)
Communication Interface	USB serial port
Communication Protocol	Open ASCII command
Supported Systems	Windows / Linux / MacOS / Android
Motor Connector	D-sub 26 (MDR20 for open-loop control)
Limit Switch Input	Positive limit, Zero position limit
Encoder Power Supply	DC 5V output
Panel Controls	Hall stepless speed regulation joystick, 1.54-inch OLED (Chinese menu)
Power-off Memory	Equipped, maintains position
Housing Dimensions	76.074.247.0mm
Weight	183.5g
Note*: For pulse width recognition, a dedicated complex signal generator is required to generate signals with different pilot pulse widths to determine the motion direction, and the motion speed is adjusted according to the pulse frequency. For frequency recognition, the motion direction is determined only by the frequency level, and the speed follows the user’s global speed setting (1-8x). Therefore, the requirements for user signals are simple, only frequency modulation characteristics are needed.

 

Model	ASD-A	ASD-B
Specifications	Ø101.9*3.5mm	Ø101.9*15.1mm
Clear Aperture	Ø40mm	/
Compatible Clamping	25.476.2mm or 2576mm glass slides	Placed for use, no fixing method
Screw Hole Type	/	2 × M6
Weight	54.2g	88.4g
Material	7075 aluminum alloy + stainless steel	7075 aluminum alloy + stainless steel

Technical Description

(1) Adopting a high-subdivision microstep drive and dual linear guide rail structure, it balances the requirements of precise positioning and rapid movement. The stage can be used with the O’motion 4-axis motion control system or two OSMC-1U single-axis controllers to realize flexible switching from manual fine operation to fully automatic program control, and can be seamlessly integrated into the Oeabt microscopy system.

(2) System Matching and Application

• High-end fully automatic solution: Stage + O’motion 4-axis system. Suitable for high-end scientific research and industrial inspection requiring multi-axis coordination, closed-loop control, complex program automation and intuitive human-computer interaction.

 

• Cost-effective flexible solution: Stage +  2 × OSMC-1U controllers. Suitable for projects with limited budget, requiring independent axis control or distributed integration, with high flexibility.

(3) In terms of the control system, the stage supports USB serial communication and is compatible with multiple operating systems such as Windows, Linux, MacOS and Android. It adopts the standard ASCII O’motion communication protocol and is accompanied by complete development documents and sample programs for easy secondary development and system integration by users.

(4) Both precision and efficiency: Micron-level positioning accuracy combined with millimeter-level movement speed meets the needs of high-efficiency and precision operations. Two control schemes are provided: integrated multi-axis and distributed single-axis, adapting to different budget and integration requirements.

(5) The communication bus and power hub are specially designed for the operation of Oeabt series C-module controllers, supporting cascading to connect multiple controllers.

(6) Out-of-the-box: All necessary hardware is provided as a complete set, eliminating the complex time of model selection and integration.

Assembly

Application Examples

Engineering Drawings

OM-4X Engineering Drawing

OM-4CP Engineering Drawing

DSMC-1U Engineering Drawing

AS8080-XY Engineering Drawing