BMD1 D-Shaped Mirror Mount

Product Description

• Two-axis mount for Ø1-inch D-shaped lenses.
• Adjustment range: ±4°, 0.5° per turn.
• Can be mounted horizontally or vertically.
• Maximum component mounting thickness: 6.35mm.
• M4 counterbores for rod mounting.

The D-shaped optical adjustment mount is specifically designed for mounting Ø1-inch (25mm) D-shaped or circular mirrors, supporting optical lenses with a minimum thickness of ≥2.8mm and a maximum thickness of ≤6.35mm.

Model	BMD1
Dimensions	49.9*49.9*20.2mm
Mounted Components	Ø1-inch (25mm) circular/D-shaped optical components, thickness ≥2.8mm and ≤6.35mm
Adjustment Range	±4° tilt (pitch and yaw), 0.5° per turn
Screw Hole Type	2*M4 counterbores
Weight	67.4g
Material	Aluminum alloy

Schematic Diagram

Technical Description

(1) The D-shaped optical adjustment mount is specifically designed for mounting Ø1-inch (25mm) D-shaped or circular mirrors, supporting optical lenses with a minimum thickness of ≥2.8mm and a maximum thickness of ≤6.35mm. The lens is fixed and installed in the mount via two nylon screws. With a compact design, this mount maximizes the light-passing space, making it particularly suitable for beam selection applications and effectively avoiding blocking other light beams.

(2) The mount has an angular adjustment range of ±4°, achieving an adjustment precision of 8mrad (0.5°) per turn through two M6*0.35 adjusters. Its structural design allows users to perform fine angular control of optical components to optimize the direction of the reflected beam.

(3) In addition, the mount is equipped with 2 M4 counterbores, enabling vertical or horizontal installation on Ø1/2-inch rods. It provides flexible mounting methods to meet the configuration requirements of different experiments or optical systems.

Assembly

Application Example

Engineering Drawing