OGS Series 2D Galvo Scanning System

Product Description

• Suitable for light beams with diameter ≤5mm;
• Sold as a complete set, can be directly integrated into Oeabt® cage or free-space systems;
• The galvanometer adopts a moving-magnet motor with fast response;
• The driver is equipped with an internal PD closed-loop control circuit, ensuring high precision of galvanometer operation;
• Galvanometer products with scanning speeds of 10Kpps/25Kpps are available for users to choose;
• The pre-installation kit includes a driver, a dual-axis galvanometer motor, a heat sink, a power supply, and an adapter cube;

The high-speed scanning galvanometer positioning system is used for integration into light beam manipulation applications with small-diameter light beams (≤5mm).

Model	OGS-2AX10K	OGS-2AX25K
Maximum Beam Diameter	Ø5mm	Ø5mm
Power Supply Voltage	±10V/1A	±24V/1A
Scanning Speed	10Kpps	25Kpps
Mirror Size	X/Y axis 8*14*1mm	X/Y axis 8*14*1mm
Driver Board Size	85*62*37mm	80*50*28mm
Scale Drift	80PPM/℃	100PPM/℃
Zero Drift	/	20 urad/℃
Repeat Accuracy	15 microradians	10 microradians
Analog Signal Input Impedance	200k±1%Ω (Differential Input)	200k±1%Ω (Differential Input)
Position Input Scale Factor	0.5 V/°	0.5 V/°
Analog Position Input Range	±5V	±5V
Electronic Temperature Stability	40PPM/℃	40PPM/℃
Operating Temperature	0-50℃	0-50℃
Scanning Angle	±20°	±20°
Mirror Reflectivity	Silver Coating ≥95%	Silver Coating ≥95%
Linearity	>98.0% @45° Incidence (Wavelength Coverage: 380-680nm)	>98.0% @45° Incidence (Wavelength Coverage: 380-680nm)
Wavelength Range	400-1700nm	400-1700nm
OGS-AC212Adapter Cube	Mounting Axis: XY Dual Axis; Motor Mounting Hole: Ø12.8mm	Mounting Axis: XY Dual Axis; Motor Mounting Hole: Ø12.8mm
	Input Port: SM05 and SM1 Internal Thread; 4 places of 4-40*4, compatible with 30mm cage	Input Port: SM05 and SM1 Internal Thread; 4 places of 4-40*4, compatible with 30mm cage
	Output Port: SM2 Internal Thread	Output Port: SM2 Internal Thread
	Screw Hole Type: Bottom: 2 places of M3*2, 3 places of M4*3, 2 places of M6*2; Top: 2 places of M6*2	Screw Hole Type: Bottom: 2 places of M3*2, 3 places of M4*3, 2 places of M6*2; Top: 2 places of M6*2

Curve

Technical Description

(1) The high-speed scanning galvanometer positioning system is used for integration into light beam manipulation applications with small-diameter light beams (≤5mm).

(2) During initial setup, a drive signal generator such as DAC or DAQ is required to drive the galvanometer driver. The front-end controller of the DAC may involve different galvanometer control protocols, such as the IRDA protocol for laser animation performances or the XY2-100 protocol for laser marking. Users can choose the corresponding protocol to control the galvanometer system according to different applications.

(3) XY dual-axis motor, providing galvanometers with scanning speeds of 10Kpps or 25Kpps. Oeabt also offers a variety of installation solutions such as free-space and cage systems to integrate the galvanometer system into your optical system.

Assembly

Application Examples

Engineering Drawings

电源Engineering Drawing

驱动器+散热板Engineering Drawing

双轴振镜立方Engineering Drawing